Co-extruded Pvc Profile For Alumin accessory

Material : PVC rigid+soft

Color : Origin

Height : 5~150mm

Width :10~300mm

Thickness : 2mm

Weight : 300g/meter

 

Coextrusion plastic profiles join a few unique materials or tones in a solitary plastic profile. They require viable materials that will bond together to shape major areas of strength for a section.

The co expulsion method is many times utilized instead of adding a gasket or seal to an unbending plastic profile as an optional procedure on gathering.

We have delivered co and tri expelled profiles with double densities and with an assortment of variety mixes, including stripes of a subsequent variety.

 

Coextrusion is the method involved with joining at least two materials into a solitary custom plastic profile. Coextrusion is a very adaptable handling innovation that can make custom plastic profiles typifying various qualities (adaptable in specific regions and unbending in others). By consolidating a few materials together, we can convey one novel item with previously unheard-of qualities. The actual cycle is continually advancing as well — yielding more potential plans. The capacity to fabricate coextrusions is one of the principal advantages of plastic expulsion innovation, and one of our key assembling abilities.

 

1. Soft PVC contains softener (which is also the difference between soft PVC and hard PVC), which is easy to become brittle and difficult to preserve, so its scope of use is limited. Hard PVC does not contain softener, so it is flexible, easy to form, not fragile, non-toxic and pollution-free, and has a long storage time, so it has great development and application value

2. Different applications

Soft PVC is generally used for floor, ceiling and leather surface; UPVC is mainly used for rigid PVC pipes, pipe fittings and profiles.

3. Different physical and chemical properties

Hard PVC usually has a diameter of 40-100mm, and its inner wall is smooth with little resistance, no scaling, non-toxic, pollution-free, and corrosion resistant. The operating temperature is not more than 40 ℃, so it is a cold water pipe. It has good aging resistance and flame resistance, and can be flexibly connected and installed with rubber rings.

 

The co-extrusion process allows two or more materials to be joined together using two or more extruders and one tool. A co-extrusion requires compatible PVC materials that will bond together to form a strong finished part. We are able to manufacture and supply many co-extruded plastic products to your specification. Get in touch with us to discuss your requirements.

 

 

Co-extruded pvc profile picture: