Precision ABS plastic strip specification
Material : ABS
Color : Black
Height : 21mm
Width : 35mm
Thickness : 2mm
Weight : 180g/meter
Product Dimensions
| Property | Specification | Unit | Test Standard |
|---|---|---|---|
| Material | ABS (Acrylonitrile Butadiene Styrene) | - | ASTM D4673 |
| Color | Black (Custom colors available) | - | - |
| Height | 21 | mm | ±0.3mm tolerance |
| Width | 35 | mm | ±0.3mm tolerance |
| Thickness | 2 | mm | ±0.2mm tolerance |
| Linear Weight | 180 | g/m | - |
| Cutting Length Tolerance | ±0.5 | mm | - |
| Standard Length | Custom (1m - 6m available) | mm | - |
| Surface Finish | Smooth / Textured (Optional) | - | - |
ABS material properties
1, Conventional performance plastic ABS is non-toxic and tasteless, and its appearance is ivory translucent, or transparent particles or powder. The density is 1.05 ~ 1.18g/cm3, the shrinkage is 0.4% ~ 0.9%, the elastic modulus is 2gpa, the Poisson's ratio is 0.394, the moisture absorption is < 1%, the melting temperature is 217 ~ 237 ℃, and the thermal decomposition temperature is > 250 ℃.
2, Mechanical properties plastic ABS has excellent mechanical properties and Custom precision ABS extruded plastic strip OEM China; Plastic ABS has excellent superior wear/oil resistant. It can be used for bearings under medium load and low speed. The creep resistance of ABS is larger than PSF and PC, but smaller than PA and POM.
3, The thermal deformation temperature of thermal performance plastic ABS is 93 ~ 118 ℃, and the product can be increased by about 10 ℃ after annealing. ABS can still show certain toughness at - 40 ℃ and can be used in the temperature range of - 40 ~ 100 ℃.
4, Electrical performance plastic ABS has good electrical insulation, and is hardly affected by temperature, humidity and frequency. It can be used in most environments. 5, Environmental performance plastic ABS is not affected by water, inorganic salts, alkali and a variety of acids, but can be dissolved in ketones, aldehydes and chlorinated hydrocarbons. It will produce stress cracking due to the erosion of glacial acetic acid and vegetable oil. ABS has poor weather resistance and is easy to degrade under the action of ultraviolet light; After half a year outdoor, the impact strength decreased by half.
ABS plastic contains two materials, one of which is easy to deform compared with the other, so the plastic surface produced by melt front rolling is essentially uneven in the order of microns. The best gloss depends on clinging this uneven new surface to the highly polished mold surface. Although it is always expected that higher melt temperature will be conducive to improving gloss, But in most cases, the opposite is true, especially in cold molds
Some grades of ABS plastics are not very sensitive, so the performance response curve is relatively flat. Undercooling of the melt will also reduce the gloss, because the filling is hindered. Because the overall performance response curve is a bow back curve. The mold temperature has a strong impact on the gloss. The cold mold (below 1400F) reduces the available gloss, At the same time, other forming parameters are more sensitive to gloss. Higher die temperature (150 ~ 1800f) improves gloss and reduces the influence of melt temperature
abs plastic strip picture:a
Tooling/Mould development time
We can according your drawing to make new tooling/mould for it,usually it takes 15 days,
and we will sent sample to you for checking,after your confirm the sample,we can start
process the order.
we can customize cartons, cardboard, wooden cases, pallets and label paper according to customer packaging requirements.
Trade Term:EXW/FOB/FCA.
Installation Guide
Before You Begin
Proper installation ensures optimal performance and longevity of your ABS plastic strip. Please read these instructions thoroughly before starting the installation process.
Required Tools and Materials
| Category | Items |
|---|---|
| Cutting Tools |
|
| Adhesives (Choose one) |
|
| Surface Preparation |
|
| Safety Equipment |
|
Step-by-Step Installation
Measure and Mark
Measure the required length accurately. Mark the cutting line with a permanent marker or masking tape. Account for any expansion gaps (approximately 3mm per meter for temperature variations).
Cutting the ABS Strip
For Hand Saw:
- Use a fine-toothed saw (14-18 teeth per inch)
- Support the strip firmly on both sides of the cut
- Cut with steady, even strokes at a low angle
- Do not force the blade - let the saw do the work
For Power Tools:
- Use a blade designed for plastics (high tooth count)
- Feed the material slowly to prevent melting
- Keep the blade cool; consider intermittent cutting for long cuts
Surface Preparation
Clean all bonding surfaces with Isopropyl Alcohol
Allow surfaces to dry completely
For enhanced adhesion, lightly sand the bonding area with 220-400 grit sandpaper
Wipe away any dust particles
Important: Do NOT use acetone for cleaning - it is too aggressive and may damage the ABS surface.
Adhesive Application
Using ABS Cement:
- Apply a thin, even coat to both surfaces
- Join parts within 30 seconds while cement is still wet
- Apply firm pressure for 30-60 seconds
- Allow 24 hours for full cure before stress loading
Using Two-Part Epoxy:
- Mix equal parts of resin and hardener
- Apply to one surface only
- Join parts within the working time (typically 5-30 minutes)
- Clamp if necessary and allow full cure time (typically 24 hours)
Mechanical Fastening (Alternative)
When adhesive bonding is not suitable:
Pre-drill all screw holes to prevent cracking
Use pilot holes slightly smaller than screw diameter
Do not over-tighten fasteners
Consider using washers to distribute load
Leave slight clearance in holes to allow for thermal expansion
Heat Bending (If Required)
ABS can be thermoformed for curved applications:
Heating temperature: 220°F - 350°F (105°C - 175°C)
Use a strip heater for localized bends
Heat evenly across the bend line
Bend slowly and hold in position until cool
Do not overheat - this will cause bubbling or discoloration
Installation Best Practices
- Store ABS strips in a dry, temperature-controlled environment before installation
- Allow material to acclimate to room temperature for at least 24 hours before cutting
- Install at ambient temperatures between 10°C and 30°C (50°F - 86°F)
- For outdoor applications, consider UV-stabilized grades
- Clean finished installations with mild soap and water only
Safety Warning: Always work in well-ventilated areas when using adhesives or cutting ABS plastic. Wear appropriate PPE including safety glasses and respiratory protection when sanding or cutting.
Customization Options
Available Customizations
| Option | Available Choices | Lead Time Impact |
|---|---|---|
| Colors | Black, White, Gray, Ivory, or custom RAL/Pantone color matching | Custom colors: +5-7 days |
| Dimensions | Custom height, width, and thickness per your specifications (new tooling may be required) | New mould: ~15 days |
| Length | Cut to length from 100mm to 6000mm | Standard |
| Surface Texture | Smooth, Matte, Textured, Wood grain, Leather grain | May require new tooling |
| Material Grades | General Purpose, High Impact, Flame Retardant (UL94 V-0), UV Stabilized, FDA Compliant | Specialty grades: +3-5 days |
| Co-Extrusion | Multi-color, Multi-durometer (rigid + flexible), Bi-layer profiles | Custom tooling required |
Minimum Order Quantities
| Order Type | Minimum Quantity | Notes |
|---|---|---|
| Standard Profile (Existing Mould) | 500 meters | Ready for production |
| Custom Color (Existing Profile) | 1,000 meters | Color matching included |
| New Custom Profile | 2,000 meters | Includes mould development |
| Sample Order | Contact us | For evaluation purposes |
FAQ
Q: What is ABS plastic and why is it used for extrusion profiles?
A: ABS (Acrylonitrile Butadiene Styrene) is an engineering thermoplastic composed of three monomers: acrylonitrile provides chemical stability and heat resistance, butadiene delivers toughness and impact resistance, and styrene contributes rigidity and processability. This combination makes ABS ideal for extrusion profiles because it offers excellent tight ±0.5mm tolerance, impact resistance even at low temperatures (-40°C), a smooth surface finish that's easy to paint or print on, and good machinability. As a manufacturer, we choose ABS for display and industrial profiles because it balances performance with cost-effectiveness.
Q: What is the best way to cut ABS plastic strips?
A: For clean cuts on our ABS plastic strips, we recommend using a fine-toothed hand saw (14-18 teeth per inch) or a jigsaw/circular saw with a blade designed for plastics. The key is to cut slowly and steadily to prevent heat buildup, which can melt the plastic and create rough edges. For precision cutting, a table saw with a carbide-tipped blade works best. Always support the material on both sides of the cut line and avoid forcing the blade. After cutting, lightly sand the edges with 220-400 grit sandpaper if a smooth finish is required.
Q: What adhesive should I use to bond ABS plastic strips?
A: The best adhesive depends on your application:
- ABS Pipe Cement/Solvent: Creates a chemical weld by dissolving surface layers - ideal for ABS-to-ABS bonding with maximum strength
- Two-Part Epoxy: Provides high strength and chemical resistance - best for structural applications or bonding ABS to different materials
- Cyanoacrylate (Super Glue): Quick bonding for small parts and light-duty applications
- Structural Acrylics: Good balance of flexibility and strength
Important: Clean surfaces with isopropyl alcohol before bonding, but avoid acetone as it may damage the ABS surface.
Q: Can ABS plastic strips be used outdoors?
A: Standard ABS has limited UV resistance and may experience some yellowing and brittleness with prolonged outdoor exposure. However, we offer UV-stabilized ABS grades that are formulated for outdoor applications. For exterior use, we recommend:
- Requesting UV-stabilized ABS material when ordering
- Applying a protective UV-resistant coating or paint
- Choosing darker colors (like black) which are more UV stable
For maximum outdoor durability, consider our ASA profiles as an alternative - they offer superior weatherability.
Q: What is the temperature range for ABS plastic strips?
A: Our ABS plastic strips perform reliably across a wide temperature range:
- Continuous use temperature: -40°C to +100°C (-40°F to +212°F)
- Heat deflection temperature: 93-118°C (depending on load)
- Forming temperature: 220°F - 350°F (105°C - 175°C) for thermoforming or bending
ABS maintains its impact resistance even at sub-zero temperatures, making it suitable for refrigeration applications. However, continuous exposure above 85°C may cause gradual degradation of mechanical properties.
Q: Can you make custom profiles in different dimensions?
A: Absolutely. As a custom plastic extrusion manufacturer, we specialize in creating profiles to your exact specifications. The process typically involves:
- You provide a drawing or sample with dimensions
- Our engineering team reviews and confirms feasibility
- We develop custom tooling/mould (approximately 15 days)
- Sample production for your approval
- Full production upon sample confirmation
Mould development requires a 50% down payment, with balance due upon sample approval. The mould remains property of the customer for future orders.
Q: Is ABS plastic safe and non-toxic?
A: ABS plastic is generally considered safe for most applications. It is non-toxic, has no known carcinogens, and has no significant health hazards documented under normal use conditions. Our ABS materials are RoHS and REACH compliant, meaning they do not contain restricted hazardous substances. However, ABS is not FDA-approved for direct food contact in standard grades. If your application requires food-contact approval, please specify this requirement and we can supply FDA-compliant ABS grades.
Q: Can ABS plastic be recycled?
A: Yes, ABS plastic is 100% recyclable. As a thermoplastic, it can be melted down and reprocessed multiple times without significant loss of properties. ABS carries recycling code #9 (or #7 in some regions). Our factory recycles production scrap internally, and finished products can be recycled through appropriate plastic recycling facilities. We also offer recycled ABS options for customers seeking more sustainable material choices - please inquire about our recycled content grades.
Q: How do I get a quotation?
A: To receive an accurate quotation, please provide:
- Profile drawing with dimensions (or sample for measurement)
- Material requirements (standard, flame retardant, UV-stabilized, etc.)
- Color specifications
- Quantity required (in meters or pieces)
- Cutting length (if applicable)
- Any special packaging requirements
Contact us via email (ken@euson.cn), WhatsApp (+86-13532547483), or through the inquiry form on this page. We typically respond within 24 hours on business days.
Hot Tags: abs plastic strip, China, suppliers, manufacturers, factory, customized, buy, made in China